You have found the turntable you want and the equipment quote looks reasonable. Then the questions start: what does it cost to get that crate to a port in the UK, to Australia, to New Zealand, or to India — and what happens to the number once it lands? Two identical platforms can arrive at very different totals, and neither supplier's catalogue will tell you which one is yours.
That is not because anyone is hiding a figure. A landed cost is an equipment price plus a stack of country-specific items: freight, insurance, import duties and taxes, clearing, inland haulage, the pit and drainage, local electrical work and installation. Name those items and the total stops being a guess. Start with what physically ships and what the receiving country adds, and the number at the end of this page will make sense on its own.
What ships in the crate · See the price band · Jump to the quote form
A residential turntable is industrial handling equipment scaled down for a driveway, crated for export. The shipment is a list of parts and documents your broker and contractor can name, check and price — not an adjective:
Every line above is something that can be listed on an invoice and inspected on arrival. That is the useful starting point for a landed-cost quote, because it separates the figure we control from the figures your country adds. So here is how experienced buyers judge the total.
Run those five checks and the figure below reads less like a shipping estimate and more like the sum of decisions you can see.
That is why a complete residential car turntable typically lands in the range of roughly USD 6,570 to 12,510 EXW for the equipment.
EXW means ex works: the rotating system is priced at our factory. It is a planning band, not a delivered price tag. Freight and marine insurance to your port, import duties and taxes, customs clearance, inland transport, unloading, excavation, the concrete pit, drainage, pit-edge steel, local electrical connection and installation are all excluded, because they depend on which country you are in and what your ground is like. The band is indicative only and is subject to a written quotation for your configuration.
The band is deliberately wide. Requirements change while a project develops — a recessed stone infill instead of steel plate, a higher load rating for a heavy EV, a second drive, a different destination port — and the equipment figure moves with them. We publish it so you can budget early. The written, itemised quotation for your specific configuration and destination is the only binding number, and it is the one thing a web page cannot give you.
| Delivery scenario | Who handles freight, import and site work | Position of the equipment portion |
|---|---|---|
| Factory collection / EXW only | Buyer arranges collection, export, shipping, import and installation; we supply the crate and documents | Lower-to-mid band, equipment only |
| Delivered to your port | We quote freight to the named port; buyer handles duties, clearing, inland haulage and all site work | Equipment band plus freight line |
| Delivered and installed | We coordinate shipping and the civil/electrical scope with a local contractor; duties and site conditions priced per country | Equipment band plus the full landed stack |
Planning scenarios only. Duties, clearing and labour are set by the destination country; the written quotation is the only binding figure.
If you read those three rows and cannot tell which one is yours, that is the gap worth closing. Tell us your country, your nearest port and the largest vehicle, and our engineers will place you in the right scenario and put a firm landed figure on it. Request your landed-cost quote →
The rest of this page is the detailed landed-cost reference — kept visible for brokers, contractors and anyone checking a cost line by line.
The four destinations below are grouped in one table because the equipment is identical; only the destination-side items change. These are the lines to price and confirm, not a ranking of where demand is strongest — destination words here are quoting scenarios, not search-volume or market-size data.
| Destination | Freight & inland | Duties, taxes & clearing | Power supply & local install |
|---|---|---|---|
| United Kingdom | Named UK port plus inland haulage to the property | Import duty and VAT at the current rate; importer of record and broker named before quoting | Single-phase 230 V supply; check whether existing block paving can be reused and who holds any local approval |
| Australia | Freight to the named port, then long inland distances to many properties | Duty, GST and biosecurity/quarantine handling of the timber crate to be confirmed | Single-phase 230 V as standard; local electrical connection and pit works quoted on site |
| New Zealand | Port arrival plus inland transport, which varies with the property location | Import duty and GST; clearing agent and importer of record confirmed in advance | Single-phase supply; outdoor corrosion protection and drainage specified for the site |
| India | Freight to the named port plus inland movement to the site | Duty, integrated taxes and clearing formalities; importer and documentation checked before shipping | Single-phase 230 V supply; verify site voltage and frequency and arrange local installation |
Nothing in that table is a promise about how a shipment will be cleared or approved — those are set by the destination and confirmed with your broker. What we do is price the crate accurately and hand your contractor the drawings needed to price the right-hand columns locally.
| Included in the equipment price | Quoted separately for your destination |
|---|---|
| Structural frame, deck and recessed infill tray where specified | Ocean or air freight, marine insurance and port charges |
| Centre slew bearing, support wheel ring and drive ring | Import duties, taxes, customs clearance and quarantine handling |
| Motor, reducer, variable-frequency drive and control panel | Inland haulage, unloading and delivery to the property |
| Wireless remote with two handsets | Excavation, concrete pit, drainage and reinstatement of paving |
| Seaworthy export crate and matching shipping documents | Pit-edge angle steel, galvanised or stainless |
| Civil foundation drawing and pit-edge specification | Local electrical connection, approvals and installation |
That split is why an EXW figure and a delivered-and-installed figure should never be compared like for like. We supply the drawings and the documents so your broker and contractor can price the right-hand column before you commit.
Give our engineers the same details they use to size the platform, plus the destination inputs that set the landed lines:
With that, we confirm the diameter and load rating, recommend the deck and drive, and return an itemised EXW quotation together with the civil foundation drawing. Freight to your named port can be added as a separate line so you can see the crate cost and the shipping cost side by side.
Want the equipment-only breakdown first? Our guide to what sets a car turntable's price covers the factors inside the EXW figure.
The equipment typically sits in a planning band of roughly USD 6,570 to 12,510 EXW. Delivered cost adds freight and insurance to your named port, import duty and VAT, clearing, inland haulage, the pit and drainage, electrical connection and installation. Those destination lines are quoted separately, so send your country, nearest port and largest vehicle for a written figure.
No. Our quotation is EXW and covers the rotating system, export packing and shipping documents. Freight, insurance, import duties and taxes, customs clearance, inland transport, excavation, the concrete pit, drainage, reinstatement of paving, electrical connection and installation are arranged and priced at your destination. We supply the foundation drawing and pit specification so those costs can be priced locally before you order.
The platform is the same; what changes is the destination. Freight distance from the port, import duty and tax rates, clearing and quarantine formalities, local voltage and the cost of site labour all differ by country. That is why we price the equipment EXW and add freight to your named port as a separate line rather than quoting one universal delivered figure.
Groundwork is not included in the EXW equipment price. Excavation, the concrete pit, drainage, pit-edge steel, reinstatement of paving and electrical connection are site costs, priced by your local contractor from the foundation drawing we supply. Reusing existing paving or choosing a surface-mounted deck can change that line, so the site method is confirmed before a landed total is given.
Often yes, but it depends on the deck and pit method. A recessed tray can be infilled with the paving you already have, while a surface-mounted deck sits above the existing surface. Because the choice changes the site-work cost, we ask for a photo of the driveway and confirm the method with the foundation drawing before pricing the landed total.
Send the length, width, wheelbase and weight of your largest vehicle, a photo and rough dimensions of the driveway or garage, your country and nearest port, your preferred deck finish, and your local power supply. Our engineers confirm the diameter and load rating, recommend the deck and drive, and return an itemised EXW quotation with foundation drawings; freight to your port is added as a separate line.
Tell us your country, nearest port, vehicle model and available space. Our engineers will recommend a diameter and load rating, then send a written EXW quotation, foundation drawings and a freight line to your port.